doc:transistors
Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentesRévision précédenteProchaine révision | Révision précédente | ||
doc:transistors [2022/07/31 17:57] – cgay | doc:transistors [2022/09/01 15:18] (Version actuelle) – cgay | ||
---|---|---|---|
Ligne 1: | Ligne 1: | ||
====== Transistors etc ====== | ====== Transistors etc ====== | ||
+ | |||
+ | ===== Triacs ===== | ||
+ | |||
+ | wikipedia : | ||
+ | [[https:// | ||
+ | [[https:// | ||
+ | |||
+ | |||
+ | BTA12 and BTB12 series. Exemple BT A 12 - 600 BW RG. | ||
+ | |||
+ | A = insulated. B = non insulated. | ||
+ | |||
+ | 12 = 12A | ||
+ | |||
+ | 600 = 600V | ||
+ | 800 = 800V | ||
+ | |||
+ | Sensitivity and type. | ||
+ | B = 50mA Standard. | ||
+ | C = 25mA Standard. | ||
+ | SW = 10mA Logic Level. | ||
+ | BW = 50mA Snubberless. | ||
+ | CW = 35mA Snubberless. | ||
+ | TW = 5mA Logic Level. | ||
+ | |||
+ | Packing mode | ||
+ | RG = Tube | ||
+ | |||
+ | Available either in through-hole or surface mount packages, the BTA12, BTB12 and | ||
+ | T12xx Triac series are suitable for general purpose mains power AC switching. They | ||
+ | can be used as ON/OFF function in applications such as static relays, heating | ||
+ | regulation or induction motor starting circuit. They are also recommended for phase | ||
+ | control operations in light dimmers and appliance motors speed controllers. | ||
+ | |||
+ | The Snubberless™ versions (W suffix and T12xx) are especially recommended for | ||
+ | use on inductive loads, because of their high commutation performance. By using an | ||
+ | internal ceramic pad, the Snubberless™ series provide an insulated tab (rated at | ||
+ | 2500 V RMS ) complying with UL standards (file reference: E81734). | ||
+ | |||
+ | Logic Level BTA12-600TW and BTA12-600SW offer low holding current, ideal to | ||
+ | design light dimmers for LED lamps. | ||
+ | |||
+ | Triacs chez : | ||
+ | [[https:// | ||
+ | [[https:// | ||
+ | |||
===== IGBT (e.g. plaques à induction) ===== | ===== IGBT (e.g. plaques à induction) ===== | ||
+ | |||
+ | Documentation : | ||
+ | [[http:// | ||
+ | [[https:// | ||
+ | [[https:// | ||
+ | |||
+ | mai 2022 plaque à induction de Colline Henry transistor IGBT = H20R1203 tension élevée : 1200V 20A !\\ | ||
+ | marquage IHW20R120R3, | ||
+ | Ceci semble a priori équivalent : [[https:// | ||
+ | (IXYS aussi a des références qui commencent par " | ||
+ | Laurent : IXYS est une marque que je fuis. D' | ||
+ | |||
+ | [[https:// | ||
RAM : un IGBT 17A parmi un [[https:// | RAM : un IGBT 17A parmi un [[https:// | ||
Ligne 8: | Ligne 67: | ||
St Quentin Radio : [[https:// | St Quentin Radio : [[https:// | ||
+ | |||
+ | [[https:// | ||
ecomposant : [[https:// | ecomposant : [[https:// | ||
Ligne 15: | Ligne 76: | ||
ecomposant : [[https:// | ecomposant : [[https:// | ||
- | ecomposant : diodes dans la catégorie IGBT : quelques classiques 1N400x (x=3,6), et quelques diodes rapides HER10x (x=4,7,8) | + | ecomposant : diodes dans la [[https:// |
doc/transistors.1659290275.txt.gz · Dernière modification : 2022/07/31 17:57 de cgay